The TP7M uses strain gauge technology which provides higher accuracy than standard touch
trigger probes, The TP7M is a multi-wired probe and must be used with the PH10M motorised
probe head or the PH6M fixed probe head. It is autojointed, which provides the autochange
function required on many DCC CMMs.

Principal Application: FMS and automated systems
Mounting: Multiwired autojoint
Suitable interface: PI 7-2
Sense directions: 6 axis ±X, ±Y, ±Z

2sigma at stylus tip

Trigger 1 0.25µm 0.00001in
Low force 0.25µm 0.00001in

Pre-travel variation (XY Plane)

Trigger 1 ±0.25µm ±0.00001in
Low force ±0.50µm ±0.00002in

Extended force
Trigger Force XY Plane 0.02N 0.07oz
Low force

Trigger Force Z Axis 0.15N 0.53oz
Low force

Overtravel Force XY Plane 0.78N 2.75oz
Low force

Overtravel Force Z Axis 11.75N 41.44oz

Test conditions:
Stylus length 50mm 1.97in
Stylus velocity 480mm/min 18.90in/min
Stylus force
Max extension on 200mm 7.87in

Weight (g) 85
Height (mm) 52