1-800-648-6944
 
CMM Technology, Inc.
1230 Puerta del Sol
San Clemente, CA 92673
949/366-0707
949/366-6503 fax

MOTORIZED PROBE HEAD ACCESSORIES

Call CMM Technology, Inc. for discounted used items in stock. 800-648-6944
[To Item Page] PHC10-2 Probe Head Control - RS232
The PHC10-2 controls any one of the PH10T, PH10M or PH10MQ heads based on commands recieved from either the CMM controller or the HCU1 (if fitted).
A-1368-0100
$2,965.00
[To Item Page] PHC10-2 Probe Head Control - IEEE
The PHC10-2 controls any one of the PH10T, PH10M or PH10MQ heads based on commands recieved from either the CMM controller or the HCU1 (if fitted).
A-1368-0101
$3,075.00
[To Item Page] HCU-1 Hand Control Unit
A portable head drive and position display unit for use with PHC50 and PHC10-2 motorised head controllers.
A-1345-0220
$765.00
[To Item Page] AM1 Adjustment Module
Adjust alignment of PH9, PH10, MIH or TP6M Probe Head to the CMM quill. Adjustments for Pitch, Yaw and Roll.
A-1026-0320
$780.00
[To Item Page] AM2 Adjustment Module
Adjust alignment of PH10MQ/MQH Probe Head to the CMM quill. Adjustments for Pitch, Yaw and Roll.
A-1036-0080
$780.00
[To Item Page] AC2 PC Interface Card
The AC2 PC card interface supercedes the 12 bit AC1 card. It has additional capability of 16 bit resolution, Delta-Tau bus compatibility, and full PICS operation.
A-2172-0001
$2,690.00
[To Item Page] ACC2-2 Autochange Controller Unit
Autochange controller unit for automatic probe change operation.
A-1520-0101
$2,955.00


 
Supported brands include Brown & Sharpe, Mitutoyo, Starrett, Sheffield, Giddings & Lewis, Numerex, LK, DEA, Bendix, Zeiss, Cordax,
IMS, Hansford, Federal, Helmel, Poli and others.

 
PRE-OWNED CMMs || MANUAL || CNC/DCC || CALIBRATION SERVICES || REPAIRS || RETROFITS || CMM ACCESSORIES
WHY CHOOSE US || CONTACT US || HELPFUL LINKS || SITE MAP || HOME


Designed, Built and Maintained by
WebAha!